Canon C70 - Manual (Page 229)

Chapter 8 Receiving Faxes 8-19
Receiving F
a
x
e
s
Network FAX/TEL Switching (Australia Only)
In Australia, Telstra offers the FaxStream DUET capability. This service
allows you to assign two numbers to your line: one for fax and one for
telephone. When the fax number is called, the network sends a specific
ring tone which your unit recognises and automatically handles as a fax
call. If the telephone number is called, a different ring tone is sent out
from the network so that the call is handled as a voice call. This means
that there is no switching delay at the caller’s end.
❏ Triple ring (short-short-short) for fax receiving.
Three short rings, at regular intervals.
❏ Any ring except triple ring (depending on your switchboard) for
telephone conversation.
n
You can also set the MultiPASS C70 for network FAX/TEL switching
from the MultiPASS Desktop Manager. (
1 MultiPASS Suite Software
User’s Guide)
Setting the MultiPASS C70 for Network Switch
Follow the procedure below to set the receive mode to NET SWITCH .
1. Press Function .
2. Press Data Registration .
3. Press Set .
USER SETTINGS
Set
DATA REGSTRATION
01
Data Registration
Function