Printing on fabric sheet fs-101 – Canon C70 User Manual
Page 138
5-24
Paper Handling
Chapter 5
7. Press
Set
.
The MultiPASS C70 feeds the cleaning sheet into the MultiPASS C70
and cleans the rollers.
Printing on Fabric Sheet FS-101
Fabric Sheet FS-101 for Canon printers come with a booklet that
describes special handling procedures. Be sure to look through this
booklet for special information regarding the fabric sheet.
n
❏ Do not use the fixing agent that is supplied with the Fabric Sheet FS-
101. This agent is not needed when printing with the MultiPASS C70.
❏ Do not touch newly printed fabric sheets until the ink has dried
completely. This takes about an hour.
Follow this procedure to load and print on Fabric Sheets FS-101:
1. Make sure the paper thickness lever is set to the right (
e
).
❏ For details, refer to Setting the Paper Thickness Lever on page 5-10.
c
To avoid paper jams, smearing, and other problems, never open the
printer cover to set the paper thickness lever while the MultiPASS
C70 is printing.
In
k
C
a
rt
rid
g
e
BC
l-21
Color
M
a
d
e
in
J
a
p
a
n
In
k
C
a
rt
rid
g
e
B
C
l-
2
1
B
la
c
k
M
a
d
e
in
J
a
p
a
n
Set