Canon C70 - Manual (Page 232)

8-22 Receiving Faxes Chapter 8
Network FAX/TEL Switching (New Zealand Only)
In New Zealand, Telecom N.Z. offers the FaxAbility capability. This
service allows you to assign two numbers to your line: one for fax and
one for telephone. When the fax number is called, the network sends a
specific ring tone which your unit recognises and automatically handles
as a fax call. If the telephone number is called, a different ring tone is
sent out from the network so that the call is handled as a voice call. This
means that there is no switching delay at the caller’s end.
n
You can also set the MultiPASS C70 for network FAX/TEL switching
from the MultiPASS Desktop Manager. (
1 MultiPASS Suite Software
User’s Guide)
Setting the MultiPASS C70 for Network Switch
Follow the procedure below to set the receive mode to NET SWITCH .
1. Press Function .
2. Press Data Registration .
3. Press Set .
4. Use d or u to select RX SETTINGS .
RX SETTINGS
02 08
USER SETTINGS
Set
DATA REGSTRATION
01
Data Registration
Function