Canon C70 - Manual (Page 278)

12-4 Maintenance Chapter 12
Periodic Cleaning
Your MultiPASS C70 requires little periodic maintenance. Follow these
guidelines to keep your MultiPASS C70 in good operating condition:
❏ Before you clean the MultiPASS C70, be sure to print any faxes
stored in memory.
❏ Do not use tissue paper, paper towels, or similar materials for
cleaning; they can stick to the components or generate static charges.
❏ Be sure to disconnect the power cord before cleaning the unit.
Cleaning the Outside of the MultiPASS C70
Clean the MultiPASS C70’s outer casing as follows:
n
When the power cord is disconnected, the image memory is completely
erased. Therefore, before you begin cleaning the MultiPASS C70, be sure
to print any faxes stored in its memory. (
1 pp. 7-29, 8-18, 8-28)
1. Disconnect the power cord from the MultiPASS C70.
2. Wipe the MultiPASS C70’s exterior with a clean, soft, lint-free cloth
moistened with water or diluted dishwashing detergent solution.
c
Never use volatile liquids such as thinners, benzene, acetone, or any
other chemical cleaner to clean the interior of the MultiPASS C70, as
they can damage its components.
3. Plug the power cord back in.