Canon C70 User Manual

Page 225

Chapter 8

Receiving Faxes

8-15

Receiving F

Follow the procedure below to receive a fax manually:

3. When you hear the handset, telephone, or extension phone ring,

pick up the handset.

If you hear a person’s voice:

4. Start your conversation. If the caller wants to send a fax after

talking to you, ask them to press the start button on their fax
machine. When you hear a slow beep, press

Start/Scan

on the

MultiPASS C70 to begin receiving the fax. Hang up the handset.
❏ If the telephone is located away from your unit, dial 25 (the

remote receiving ID) on your telephone and hang up.

If you hear a slow beep tone or silence:

4. Someone is trying to send you a fax.

If the telephone is close to your unit, press

Start/Scan

on the

MultiPASS C70. Hang up the handset.

❏ If the telephone is located away from your unit, dial 25 (the

remote receiving ID) on your telephone and hang up.

❏ The MultiPASS C70 begins receiving the fax.

❏ You can change the number for the remote receiving ID (00 to 99) or

turn the feature off. (

REMOTE RX

, pp. 14-11, 14-12)

❏ The unit will make a beeping sound if the handset is not hung up

properly. This is called the offhook alarm and can be turned off.
(

OFFHOOK ALARM

, pp. 14-5, 14-6)

❏ Be sure to hang up the handset after you press the

Start/Scan

button

or dial the remote receiving ID for remote receiving; otherwise the
call will be disconnected.

❏ If you have an answering machine connected to your MultiPASS C70

that can carry out remote-control operations (controlling your
answering machine from a remote telephone), the security code for
this function may be the same as the two-digit ID code described
above. If so, make sure you change the MultiPASS C70’s two-digit ID
code to make it distinct from the answering machine’s security code.
(

REMOTE RX

, pp. 14-11, 14-12)

Start / Scan