Canon C70 - Manual (Page 132)

5-18 Paper Handling Chapter 5
Using Canon’s Specialty Papers
This section provides guidelines for printing on Canon’s specialty
papers and describes special procedures required for high resolution
paper, fabric sheets, and banner paper.
Specialty Paper Guidelines
n
Be sure to read any instructions that come with your Canon specialty
paper. These instructions provide important information regarding how
to achieve the highest print quality with these papers.
Follow these guidelines:
❏ When feeding transparencies or back print film, remove each sheet
after it is delivered, being careful not to touch the document tray or
extension. Do not allow film sheets to stack up in the output tray.
(Should you dirty the document tray or extension when removing
the sheets, wipe them clean with a clean, soft, lint-free cloth
moistened with water or diluted dishwashing detergent solution.)
❏ Let the printed sheets of film or paper dry completely before storing
them.
Paper Type Drying Time
Canon High Gloss Film HG-101 10 minutes
Canon Glossy Photo Paper GP-201 10 minutes
Canon Fabric Sheet FS-101 1 hour
Canon Transparencies CF-102 15 minutes
Canon Back Print Film BF-102 15 minutes
❏ When your output has dried completely, cover its printed side with a
sheet of plain (not coated) paper before storing it; this is recommended
even if you place the sheets of film in a clear file or plastic holder.