beautypg.com

Making connections, Connecting the multipass c70 to your pc – Canon C70 User Manual

Page 53

background image

Chapter 2

Setting Up Your MultiPASS C70

2-15

Setting Up

Y

our

MultiP

ASS C70

Making Connections

Connecting the MultiPASS C70 to Your PC

Your MultiPASS C70 has an 8-bit, bi-directional parallel interface port
that allows you to connect it to your PC. You can purchase a
Centronics

®

-compatible parallel cable with bi-directional capability from

your Canon dealer or any computer store. Make sure the cable is IEEE
1284-compliant.

n

For best results, use a cable that is no longer than 2 metres.

Connect the MultiPASS C70 to your PC as follows:

1. Make sure your PC is turned off and the MultiPASS C70 is

unplugged.

2. Align the cable connector with the parallel interface port so their

shapes match.

3. Gently press the cable connector into the port.

4. Secure the cable connector by snapping both wire clips (on the sides

of the port) into the cable connector.