Dime irterl'cih 08:00:30, Hrrhihgi, All track log points uill be deleted – Garmin GPSCOM 190 User Manual
Page 73: Fire you sure or no
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
R [£ TERENCE
TRACK LOG
RECORD TRfiCR:VeS
CRITERIR:
Dime
iRterL'cih
08:00:30
riEnORV USED
ID OF
2Ü4B
PHTS
TRRCRROK-i
OLERR TRROK LOO*?
126.77 119.00
You
may
sdect flow
often
track
points tire
Jaid down,
w/iicfi will
effect the display
on tfie
map pa^e.
OLERR TRROR LOC
HRRHIHGi
all track log
points uill be
deleted
fire you sure
or No?
126.77 119.00
To dear
the track
log,
fiigh-
ligfit
the 'Yes?' prompt and
press ENTER.
Track Log (cont.)
To turn the track log on or off:
1.
Highlight the 'RECORD TRACK' field and press
2,
Select 'Yes?' or 'No?' and press
NOTE: Turning the track recording off will disable the
TracBack feature.
The stored track criteria determines how often posi
tions are stored in the track log. The default setting is
automatic, and stores tracks based on resolution. This
setting gives you the most efficient use of track memory
and provides the most accurate TracBack route.
To change the criteria to record points based upon a
specific time interval:
1.
Highlight the 'CRITERIA' field and press
2,
Select 'Time Interval' and enter a value in hours, min
utes and seconds. Press'
The rest of the track log setup page displays the per
centage of memory used to store the current track log
data and contains function fields used to clear the track
log memory and activate the TracBack feature.
To clear the track log:
1.
Highlight ‘CLEAR TRACK LOG?' and press CB-
2.
A warning page will appear, asking you to confirm your
actions. Highlight 'Yes?' and press •
TracBack Function
The last option on the track log options page is the
TracBack function which lets you activate a TracBack
route using the track log (see pages 45-46 for more
information.)
To activate a TracBack route:
1. Highlight 'TRACBACK?'and press