Garmin GPSCOM 190 - Manual (Page 46)

The memory setup submenu lets you manage the
memory features of the GPSCOM 190 including locking
out frequencies. Any frequency locked out will be
skipped over during scanning. For example, if you are
scanning all the frequencies in memory for a particular
airport which has ATIS, the scan will stop on ATIS and
never resume scanning, because the ATIS transmission is
continuous. Locking ATIS out will prevent the
constant stopping.
To enter a frequency into an empty memory channel:
1. Highlight the memory channel frequency field.
Memory Setup Submenu
2. Enter the desired frequency and press to confirm.
The highlight will move the lock icon where you can lock
the frequency by pressing
3. Unlock the frequency by pressing again.
Memory Comments
Each channel may be given a 15 character user
comment.
To enter comments:
1. Highlight the comments field.
2. Enter up to 15 characters and press
moves to the next memory position,
.The highlight
Memory Changes
There may be times you’ll want to change or insert an
existing frequency and it’s corresponding comments in
memory.
To change a frequency in memory:
1. Highlight the frequency field and press
2. Use the arrow keypad to select 'CHANGE?'.
3. Enter the new frequency
4. Press to confirm.
To change comments in memory:
1. Highlight the comments field.
2. Enter the new comments and press'
R e f e r e n c e
McTHory Setup
Siiliiiiemi
MX 05
124.90 STEV
1 D 2 1 . 5 0 A
2__________ S
Entering a frequency into
memory.
MX 01
119.00 STEV
1 113.00 A
3__________ a
Entering frequency com­
ments.