Garmin GPSCOM 190 - Manual (Page 16)

The starting position of our simulated flight is
Lockhart Municipal Airport (50R, the ICAO identifier), in
Lockhart, Texas. Before we begin, let’s practice alphanu­
meric data entr}'^ by entering the tow'er frequency lor
Lockhart Municipal, which is 124,90 MHz.
1. Press the button labeled
2. Press I
3. Press I
4. Press I
5. Press I
6. Press ^0 to confirm.
If an incorrect number is selected during entry:
1. Use the arrow keys to move away from the incorrect
character and then back to it,
2. Enter the correct character.
3. Press to confirm.
To place the standby frequency in the active frequency
Beld;
1, Press the frequency transfer button on the side of the
receiver.
To transmit on the active frequency:
1. Press the PIT switch.
Simulator Mode
To continue the Takeoff Tour, you’ll need to put the
GPSCOM 190 in simulator mode:
1. Press repeatedly until the main menu page
appears.
2. Use the up or down arrow keys to move the field high-
light to the 'SETUP MENU' option and press
3. Highlight the 'Operation Mode'field and press
4. Highlight the 'Current Mode' field and press
5- Use the arrow keys to toggle through the options until
you reach 'Simulator' and press i
Frequency
E
11
Í
13
111 ■ 11111111111111
33D 2AS N ai5 E
1 1 ■ I ■ ■ I ■ ■ ^1 ■ ■ ■ ■ 1111
TRACK
356^
SPEED
e.e^v
TRIP ALT
eee.eiï. 25ee^r
N 39*00.000’
U 095*00.000'
1419:13
126.77 12^.90
Entering the tower frequen­
cy for the starting piition
of the simulatM flight,
124.90 MHz
OPERATION MODE
Current Mode:
Simulator
Initial Position
Ret: 50R
Brg: 335*
Dis:
5
.4R.
130.75 119.00
Puííing the GPSCOM 190 in
simulator mode.