Garmin GPSCOM 190 - Manual (Page 54)

Clearing a Route
The route action fields, located near the bottom of the
route definition page, allow you to clear, invert and acti­
vate the routes stored in the GPSCOM 190.
To clear a route:
1. Highlight the route number field at the top of the page
and pressi
2. Select the desired route number and press
A warning page will appear, asking you to confirm
that you want to remove all waypoints from the route.
3. Highlight the 'Yes' field with the left arrow key and press
to return to the menu page.
1^1
4. Press
Activating or Inverting a Route
After a route has been entered in the GPSCOM 190,
it can be activated in its sequence or inverted (in reverse
order). The process of activating or inverting a stored
route takes a storage route (routes 1-19) and copies it into
the active route (route 0) for navigation.
This system allows you to have an active route that
you may edit during navigation and save as an entirely
new route from the original. You will have to copy the
active route to an unused storage route to save it, since
new route or TracBack activation overwrites route 0.
To activate a route:
1. Select the route definition page and press
activate the route number field.
2. Select the route number to be activated and press
3. Highlight the 'ACT?' field and press
Inverting a route allows you to navigate route legs in
reverse order without editing the original route.
To activate a route in inverted order:
1, Follow the same ^ps as above, but select the ''INV'?'
field and press'
R e f e r e n c e
Clearing &
AciiAaiing
Routes
CLEAR ROUTE
HARHIHG!
«11 waypoints
will be remowed
■from this route
fire you sure
or No?
W X 0 5 12-1.00
To char a route, highiigfii
the ‘Yes?’ prompt and press
ENTER.
ROUTE: 1
KOJC TO KHKC
KO MflVPHT DTK PIS
l.KOJC
B.KFOE
3. KHRC
4. K1KD
5_____
STS' 4 A
U7T 51
SIS' SB
TOTAL DST 117
COPY TO: _
CLR'i INU?
126.77 119.00
To activate a route, high­
light the 'ACT?' prompt and
press ENTER.