Garmin GPSCOM 190 - Manual (Page 55)

R e f e f ^ e n c e
Active Koute
Page
flCTlME ROUTE
KOJC TO KtlKO
UflVPHT ETE Dig
KOJC ____________
KFOE ____________
KMKC D3:SS 539
KIKD
D4:DS 5B1
CLEAR?INUERT?
128.77 110.00
Active Route Page
Vie the active route page to
keep track of the estimated
time enrouti- and distance to
upcoming wci)-points.
ACTIME ROUTE
ROJC TO KHKC
HftVPHT BTfl PIS
KOJO ____________
KFOE ____________
KtIKO 19:32 537
KZKD 19=41 5ED
CLEAR?IHUERT?
126.77 119.00
The active route page can
be cotijigured to display the
ETA for each route way­
point.
Once a route has been activated, the active route page
will appear, displaying the waypoint sequence of your
route with the estimated time enroute (ETE) at your pre­
sent speed and distance to each waypoint. As long as you
are navigating an active route, the active route page will
become part of the main page sequence of the unit.
The active route page will also allow you to change
the ETE field to display desired track (DTK) or estimated
time of arrival (ETA) for each leg. You can also clear or
invert the active route.
To display DTK or ETA for each leg:
1. Highlight the 'ETE' field and press
Active Route Page
2. Use the up or down arrow keys to select 'DTK' or 'ETA'
and pressi
To invert a route from the active route page;
1, Press the up arrow key once to move the field highlight
to the 'INVERT?'field.
2. Press! to invert the route.
To clear the active route from the active route page
and stop route navigation:
1. Use the up and left arrow keys to select the 'CLEAR?'
field.
2. Press Highlight the 'Yes?' prompt on the warning
page and press to complete.
Once a route has been created and stored in the
GPSCOM 190, it can be edited at any time—even as an
active route.
To edit a route from the active route page or the
route submenu page:
1. Use the up and down arrow keys to select the waypoint
to edit and press
An on-screen menu of editing choices will appear,
wath options for reviewing, inserting, deleting or chang­
ing the waypoint field highlighted. Use the up and down
arrow keys to select from the editing choices.