Garmin GPSCOM 190 - Manual (Page 63)

R e f e r e n c e
M«p Wrt>'poíiiís
GO TO:
d f l P _____
- PREfS ENTER TO
ROTIURTE
NAUIORTION
- PRESS GOTO TO
SEE NEAREST
UAVPOlHTSySUR
126.77 119.00
Be sure to rename the
“MAP” waypoint if you
want to save it, as it wilt be
overwritten wfien you per­
form your next GOTO.
MfiP CONFIG
UflVPOINTS"?
AIRSPACE?
ROUTE:
Q n
AUTO ZOOM: ON
RINGS OFF
TRK LOG: 2E0
ORNTN: TRK UP
TRACK LOG"?
W X 0 5 12'1.90
Map Configuration Page
You may custom tailor the
map to your needs by
selecting from a variety of
changeable optiorvs wiiicfi
are controlled from the
map configuration page.
You can also use the target crosshair as an instant
GOTO destination. This function will AutoStore the posi­
tion and set a course for a new waypoint called ‘MAP’.
To GOTO the target crosshair:
1. Press SiM to capture the position.
2. Press 19 ^0 confirm the MAP GOTO.
3. Press to return to the map page.
In saving the MAP waypoint, be sure to rename it, as
it will be overwritten the next time a map GOTO is
executed.
Map Configuration
The last function you can perform from the map page
is map configuration, which lets you select what features
are displayed on the map, set the map orientation and
manage the track log functions.
To access the map configuration function;
1. Highlight the 'CFG' field on the map page and press
The map configuration page will appear, listing the
following options: waypoint viewing scale, airspace view­
ing scale, routes and plot point options, AutoZoom, ori­
entation, rings, and track log.
Waypoint Category Viewing Scale
The waypoints field provides access to the map way­
point setup page, which allows you to deline what way-
point types are displayed on the map and the scales in
which they will appear. The categories on the setup page
are: APT, INT, NDB, VOR, User and Wpt identifier. These
let you designate a minimum map scale or allow you to
turn the category off altogether. Each category' has 13
adjustable settings, from 0.2 nm to 320 nm and off.
To change the waypoint category viewing scale;
1. Highlight the desired category viewing scale and press
2. Use the up and down_^rrow keys to select the desired
setting, and press)