Garmin GPSCOM 190 - Manual (Page 34)

The VOR page lists the identifier, facility name and
city/state of at the top of the page, with the transmitting
frequency of the facility listed below. If DME or TACAN
equipment is co-located at the site, it will be indicated
next to the transmitting frequency of the VOR. The lati*
tude and longitude is also displayed, with the region and
country indicated near the bottom of the page.
User Waypoint Information
The last waypoint category available from the
GPSCOM 190’s WPT key is user waypoints. The user
waypoint page allows entty^ of a desired waypoint by
name/identifier and displays the waypoint’s position, user
comments and a reference waypoint field to calculate the
distance and bearing to any other waypoint in the data­
base. The user waypoint page can also be used to create
up to 250 waypoints by manually entering a position or
defining a range and bearing from an existing waypoint.
To view waypoint information for a user waypoint:
1. Select the USR category from any waypoint category
field.
2. Enter the identifier/name of the desired user waypoint
3. Press I
The user waypoint page allows you to create new
waypoints three ways;
• Enter the exact position of the new waypoint.
• Reference a waypoint already in the database.
• Enter a distance and bearing from your present
position.
To first step in creating a new waypoint (regardless of
what method you’re using) is to assign a name/identilier
for the new waypoint.
To create a new waypoint from the user waypoint
page:
1. Select the 'USR' category from any waypoint category
field and press The highlight will advance to the
name field.
2. Enter the waypoint name.
3. Press to accept.
R eference
VORs & User
HflVPOINT
UOR: ABB
HAEE IN
112. ¿10MHz DME
H 38^35.327'
W085*38.18r
GR LKS USA
126.77 118.00
VOR Wf^oint p a g e
HflVPOINT
USR: GARM IN
N 30*01.
W097*^16. S'le'
ZD-JUH-9E 15:3S
REF: ,
PRO
m5*
DST
3.21R.
RENAME? MEH?
DELETE? gaZM
126.77 119.00
Oserwi^oiitt p a g e