Garmin GPSCOM 190 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
R
e f e r e n c e
Frcquenc}^
Selection
H x e i
119.8B sTsv
CHRH&E^ L
INSERT'?
msm^
:
3_______
Removing a frequency from
memory.
Memory Changes (cont.)
To insert a frequency into memory;
1.
Highlight the frequency field and press i
2.
Use the arrow keypad to select 'INSERT?'.
3.
Enter the new frequency.
4. Press CB confirm.
To remove a frequency in memory:
1. Highlight the frequency you wish to remove and press
2.
Select 'REMOVE?'
3.
Press'
Emergency Channel Selection
1. Press and hold
}
r
1 1 2 1 . 5 0
IScciii
1 Rci
i| jSeek|
] ! wrt 1
Signal Strength
u
s
The GPSCOM 190’s emergency channel selection fea
ture provides a quick method of selecting the 121.5 MHz
frequency as the active frequency in the event of an in
flight emergency. The feature is available whenever the
unit IS on, regardless of GPS or communication status, or
in the unlikely loss of the of display.
To select the 121.5 MHZ frequency as the active
frequency:
1. Press and hold
To transmit on the emergency frequency:
1. Press the PTT switch.