Garmin GPSCOM 190 - Manual (Page 49)

R e f e r e n c e
GOTO K
q
GO TO:
I---
- F R E S S ENTER TO
ROTIURTE
NRUIGRTIOH
- PRESS GOTO TO
SEE NEAREST
UAVPOINTS/^SUA
126.77 119.00
Jo cancel GOTO naviga­
tion, use the LEFT ARROW
key to dear the identifier
Jield, and press ENTER
NEAREST UOR
HAVPNT &RG PIS
LOA IIB
lAH □BE' ISB
ACN 35E' 153
□IB' ITB
ttHF 24W 173
FZT □ 34' 173
lift 31E' 179
DFU □□5' 193
ARI 319' 193
121.50 12A.90
Vou may access the nearesi
waypoints page Jrom the
GOTO page by pressing the
GOTO key twice.
GOTO Function
The GPSCOM I90’s GOTO function lets you choose
any stored waypoint as a destination and quickly set a
course from your present position. Once a GOTO has
been activated, the navigation page will provide you with
steering guidance to your destination.
To activate the GOTO function:
1. Press'
2, The GOTO page will appear with the waypoint field
ready to select a destination. Enter identifier destination
waypoint.
3. Press
Waypoint Name
field
to confirm the waypoint.
GO TO:
-3RS________
- PRESS ENTER TO
RCTIUHTE
NflUIGRTION
---------- GOTO Options
- PRESS GOTO TO
SEE NEAREST
UAVPOINTS.^S«A
126.77 119.00
You can also quickly activate the GOTO function
from any other page by simply highlighting an identifier,
pressing the key and confirming the GOTO page.
This method can be used to re-center the GDI on the des­
tination waypoint, or to fly a route out of sequence.
Once a GOTO is activated, the GPSCOM 190 will
provide navigation guidance to the selected waypoint
until the GOTO is cancelled.
To cancel an active GOTO:
1. Press
2. Use the left arrow key to clear the field.
3. Press to complete the cancellation.
*