Garmin GPSCOM 190 - Manual (Page 29)

R eference
Enicrrng
W«3poifU
Identijias
HftVPOINT
APT: 500_______
LOCKHART nUH
LOCKHART TK
ELEU 53DFT
H 2$"51.0^13‘
W037N0.33^‘
FUEL AU JET
RHUV-^COnn? DOHE-^
130.75 113.00
Efiiering
Idmtljicr
HAVPOIHT
apt :
KAUS
□UELLER.nUK-.
AUSTIN TK
ELEU E3DFT
N 30^7.315’
W037*^2.095'
FUEL AU JET
RHUV'^COnn'i DOHE-i
130.75 113.00
Entering a waypoint by
facility name.
To choose a waypoint category:
1. Press to display the waypoint page.
2. Highlight the category field.
3. Press ^0 begin selection of the waypoint category.
4. Use the arrow keys and select the desired category.
5. Press to confirm the category selection.
Entering Identifiers
After a waypoint category is selected, information for
a waypoint can be viewed by entering the identifier or
name of the desired waypoint. Airports, VORs, and
NDBs may be entered by either the identifier, name, or
the location (city) of the facility. Intersections and user
waypoints must be entered by the identifier.
To enter a waypoint identifier:
1. Highlight the identifier field.
2. Enter the desired identifier and press
Note; As the identifier is entered, the GPSCOM 190
will scroll through the available database, displaying any
waypoints with the same identifier letters you have
entered to that point. Once the desired waypoint is dis­
played, press
After you’ve selected a waypoint category, waypoint
information can also be retrieved by entering the facility
name of the airport, the name of the VOR or NDB, or
their city name (intersections and user waypoints cannot
be retrieved by facility or city name).
To select a waypoint by facility or city name:
1. Select the desired waypoint category (APT, VOR or
NDB}.
2. Highlight the facility name or city name field.
3. Enter the name of the facility or city and press
Once a waypoint category and identifier have been
selected, the GPSCOM 190 will provide extensive infor­
mation through various waypoint review pages.