beautypg.com

Weekly maintenance, Monthly maintenance, Semiannual maintenance – Welch Allyn TMX428CP Trackmaster Medical Treadmill - User Manual User Manual

Page 42: Belt cleaning and inspection

background image

Preventive Maintenance

TRACKMASTER

7-2

TMX428 Owner’s Manual

July 2014

Weekly Maintenance

• Vacuum around and under the treadmill. Clean all exposed surfaces with a

vacuum cleaner. Avoid moving the TRACKMASTER® from its original
position moving it will compromise the original belt tracking setting.

• Check running belt tension.

• Observe running belt tracking, correct as required.

Monthly Maintenance

• Belt cleaning and inspection.

Semiannual Maintenance

• Evaluate the condition of the deck and belt.

• Belt adjustment needs to be performed to assure proper belt alignment.

• Check running belt adjustment.

• Check drive belt tension adjustment.

• Clean and lubricate the treadmill elevation screw.

NOTE: Use only TRACKMASTER

®

replacement parts. Using other parts may void

your warranty and may cause your TRACKMASTER

®

to malfunction.

Belt Cleaning and Inspection

1. Turn treadmill main power switch ON.

2. Start treadmill at .5 mph. With a damp small towel wipe excessive dirt from

running belt keeping the towel in the center of the length of the treadmill. Avoid
getting the towel near the rear roller.

3. When belt is clean stop treadmill.

4. Inspect running belt for tears or nicks. If damaged, replace the belt.

5. Perform Running Belt Tracking Adjustment and Belt Tension Adjustment.

This manual is related to the following products: