Initial setup, Figure 5-1 – Welch Allyn TMX428CP Trackmaster Medical Treadmill - User Manual User Manual
Page 24

Set-up Instructions
TRACKMASTER
5-2
TMX58 Owner’s Manual
July 2014
Initial Setup
Tools required for assembly
5/16 Allen wrench (supplied)
2.
The treadmill is shipped with the handrails loose, straddling the treadmill frame.
It is advised that you secure the handrails in their proper location before
removing the treadmill from the base of the crate. This prevents the internal
wires running down the handrail mount to the motor pan from being cut.
3.
With the help of a 2nd person, swing the handrail assembly into the operating
position and insert (2) 3/8-16 bolts and 3/8 lock washer each side and tighten
securely.
4.
In stall (2) plastic caps each side for a finished look. Figure 5-1
•
Operating Position
Shipping Position
Pivot Point
Insert (2) washer and bolts
each side.
Insert (2) caps each side
Figure 5-1