Welch Allyn TMX428CP Trackmaster Medical Treadmill - User Manual - Manual (Page 34)

Operating Instructions TRACKMASTER
6-6 TMX428 Owner’s Manual July 2014
BUILT-IN PROGRAM OPERATION
There are 10 pre-programmed workouts within the control. Select from Five Pre-
Programmed protocols and (5) interval training routines. To access these programs,
complete the following steps: The following (5) Pre-Programmed Protocols are explained
here.
15. In Step 3, the user selected the PROGRAM
SELECT button to access Built-In program
routines. This screen requires the user to
select either Pre-Programmed Protocols,
Fitness Interval workouts, or to define a
custom works by utilizing the + - buttons.
When the desired program is highlighted,
press the Yellow Enter button to select. If the
user selects Fitness Workouts, go to Step 17.
If the user selects the User Defined Program
go to Step 19.
16. Press the + or – button until the desired
Protocol is selected. When the desired
program is highlighted, press the Green
Start button to start routine. The detailed
description for each Pre-Programmed
Protocol to follow.
Pre-Programmed Protocol Workout Data
Bruce Protocol
Time
Speed
KPM / MPH Incline
Warm-up 3 min 2.7 1.7 0%
Stage 1 3 min 2.7 1.7 10%
Stage 2 3 min 4.0 2.5 12%
Stage 3 3 min 5.7 3.4 14%
Stage 4 3 min 6.8 4.2 16%
Stage 5 3 min 8.1 5.0 18%
Stage 6 3 min 8.9 5.5 20%
Stage 7 3 min 8.9 6.0 22%
Cool-down 3 min 2.7 1.7 0%