Welch Allyn TMX428CP Trackmaster Medical Treadmill - User Manual User Manual
Page 33

TRACKMASTER
Operating Instructions
July 2014
TMX428 Owner’s Manual
6-5
6. Press the + or – button until the desired
weight appears on the screen.
7. Press the ENTER button to continue.
8. Press the + or – button until the correct
gender appears on the screen.
9. Press the ENTER button to continue.
10. Press the + or – button until the desired
heart rate appears on the screen.
11. Press START to begin walking.
NOTE: The target heart rate function is only
available through the use of a wireless chest
strap or pulse rate watch monitoring device.
NOTE: If the user exceeds the stated heart
rate target, the screen will flash a warning that
the target heart rate has been exceeded. The
treadmill, however, will not stop. It is the
responsibility of the user to take further
action.
12. Upon pressing the START button in step
11, the screen will advise that the belt will
start in a countdown of 3 as shown at the
right.
13. After the belt begins to move, elevation
and speed control is available through the
use of the + / - keys as well as the quick
speed keys on the console.
14. Press the STOP key to immediately stop
your workout or press COOL DOWN key
to slowly decelerate the belt to a stop.