Welch Allyn TMX428CP Trackmaster Medical Treadmill - User Manual User Manual
Page 31

TRACKMASTER
Operating Instructions
July 2014
TMX428 Owner’s Manual
6-3
Start button: The green start button is used to begin a workout session. When a new user steps onto
the machine and the start up information is displayed on the screen, pressing the start button will
immediately begin a 3 second countdown of the belt start at minimum belt speed. When a user has
previously selected a pre-programmed workout, pressing the start button will start the first phase of
the program.
Stop buttons: The red hexagon shaped stop buttons are used to end an exercise session. Anytime that
it is pressed during a workout session, the running belt will gently come to a stop and be locked into
place for 2 minutes or until a new workout session is started. Upon pressing the stop
button, the
incline of the running deck will decrease to 0 percent and the cumulative user data information will
displayed for 60 seconds. To start a new workout session, press Start button or Program button.
Enter button: The yellow enter button is used to enter the user’s weight, age, and gender when
prompted by the display screen at the beginning of a workout session as well as entering data when
creating or modifying workout programs.
Cool Down button: The blue cool down button will incrementally slow the running belt speed down
by .1 mph or kph and decrease elevation by .5% elevation incrementally over 90 seconds
every
until
the running belt stops and elevation to 0% elevation.
Program / Select button: The black program button calls up a list of pre-programmed workouts and
is used to select segments of a workout when creating or modifying a workout routine.
Speed Slower: The triangular speed minus button decreases the speed of the running belt by .1 mph
or kph each time it is pressed while the belt is moving. Pressing and holding the speed slower button
while the belt is moving will decrease the speed of the running belt at an accelerated rate until it is
released.
Speed Faster: The triangular speed faster button increases the speed of the running belt by .1 mph or
kph each time it is pressed while the belt is moving. Pressing and holding the speed faster button
while the belt is moving will increase the speed of the running belt at an accelerated rate until it is
released.
Quick Speed: The (5) quick speed buttons will rapidly bring the running belt speed to the selected
speed selected from 1 to 5 mph or K.P.H.
Incline Minus: The triangular incline minus button decreases the incline of the walking surface by .5
percent each time it is pressed while the running belt is operating. Pressing and holding the incline
minus button while the running belt is in motion will increase the rate of the command. However, it
may take a few seconds to reach the desired incline that is displayed on the information screen after
the button is released.
Incline Plus:
The triangular incline plus button increases the incline of the walking surface by .5
percent each time it is pressed while the running belt is operating. Pressing and holding the incline
plus button while the running belt is in motion will increase the rate of the command. However, it
may take a few seconds to reach the desired incline that is displayed on the information screen after
the button is released.
Quick Incline: The (5) quick incline buttons will rapidly bring the running belt surface to the
selected incline from 3 to 15 percent.