Welch Allyn CardioPerfect Workstation SpiroPerfect Module - User Manual - Manual (Page 48)

CardioPerfect Workstation
SpiroPerfect Module
– User Manual
DIR 80012334 Ver. F 48 / 95
9 Viewing Spirometry tests
9.1 View a Spirometry test
To view a spirometry test:
1. Select a patient. The patient ’s previously recorded tests
appear in the test list.
2. From the test list, select a spirometry test to view.
Note: Spirometry tests are indicated with a .
3. SpiroPerfect launches and the test is displayed in the
workspace.
4. Use the tabs and the Effort selector (in the toolbar) for
selecting information to view.
9.2 Setting the Best Effort
Follow these steps for setting the Best Effort:
1. Choose File
2. Select Settings > Spirometry
3. Select the General tab
4. Under the Final result, check Best effort
5. Select the Viewing tab
6. Check Manual selection of the best effort
Note:
This action is not available if “Best composite” is set as Final result in the
Spirometry General Settings.
7. Select Ok. The Spirometry settings window closes
8. Set the effort selector to Pre or Post, see Figure 9.4. This feature will not function if
you have selected All Efforts or Final Results.
Figure 9.2 Effort selector
All Efforts: view and compare all efforts of
current test.
Pre: view and compare only the pre
efforts of current test.
Post: view and compare only post
efforts of current test.
Final/Best result: view and compare only the best
effort/ final result of current test.
9. Select the pre effort you consider best.
Figure 9.1
Patient list database