Welch Allyn CardioPerfect Workstation SpiroPerfect Module - User Manual - Manual (Page 12)

CardioPerfect Workstation
SpiroPerfect Module
– User Manual
DIR 80012334 Ver. F 12 / 95
1.4 Product Overview
SpiroPerfect performs FVC, SVC and MVV testing, including pre-post testing.
It instantly displays flow-volume curves and depicts inspiratory and expiratory
measurements.
For details, see the following sections:

Features (page 12)

Ordering Information for Replacement Parts (page 75)

Specifications (page 79)
Figure 1.1 Components of the SpiroPerfect Spirometer
Disposable Flow Transducer
For single patient use only to minimize
the risk of cross contamination.
Pressure Tubing
Connects the flow transducers to the
Spirometer sensor.
USB Sensor
Connects to the USB port of your PC.
Converts pressure to airflow.
Assembled SpiroPerfect Spirometer
Consists of: Disposable Flow transducer,
Pressure tubing, and USB Sensor.
Nose Clip
Highly recommended during testing to
avoid air leaks. Unless a medical
condition makes it uncomfortable or
unpractical to use it, in which case, the
clinician should record that the nose clip
was not used.
3 liter Calibration syringe
For daily use, to calibrate the Welch Allyn
SpiroPerfect spirometer for accuracy.
1.5 Features

Automatic interpretation and comparison to best pre-bronchodilator.

Real-time flow/volume and volume/time graphs.