Welch Allyn CardioPerfect Workstation SpiroPerfect Module - User Manual - Manual (Page 39)

CardioPerfect Workstation
SpiroPerfect Module
– User Manual
DIR 80012334 Ver. F 39 / 95
Caution It is the user’s responsibility to determine whether to accept or reject
failed calibration data. If the device does not pass calibration it could
give false readings.
Note for Spiro Perfect VCT-400 users:
If the following message appears after a failed calibration, turn the Vicatest sensor off and on
again and proceed with a new calibration.
Figure 7.10 Old calibration factors warning message
7.5 Calibration log
Figure 7.11 Calibration log window
Use the Calibration log to view calibration information of current and previous calibration
efforts. Each time the sensor is calibrated, results are stored in the calibration log. Select a
calibration effort from the list to see the curve that belongs to it.
Calibration Log
Selection
Description
Date & time Date and time of the calibration.
User Name of the user that performed the calibration.
Location Location specified in the general settings.