Welch Allyn CardioPerfect Workstation SpiroPerfect Module - User Manual - Manual (Page 29)

CardioPerfect Workstation
SpiroPerfect Module
– User Manual
DIR 80012334 Ver. F 29 / 95
Setting Description
Sensor Type Select Spiro Perfect VCT-400 or Welch Allyn SpiroPerfect.
Connected To Spiro Perfect VCT-400
Select the COM port to which the Spiro Perfect VCT-400 is connected.
Welch Allyn SpiroPerfect
The port to which the Welch Allyn SpiroPerfect sensor is connected, is
automatically detected. When operating in a thin-client environment, the
application displays an additional option, called PerfectLink™. This option
allows the use of the Welch Allyn SpiroPerfect sensor in thin client
environments.
Calibration
protocol Select the Single calibration stroke protocol (this is recommended for the
Welch Allyn Spiro Perfect)
or
Select Three calibration stroke protocol (1, 2 and 3 seconds flow)
Calibration
Error Tolerance Select Social Security (1%) for increased accuracy required by US Social
Security Administration guidelines
or
Standard (3%)
Incentive file Select the file that is used for the incentive screen for testing the pediatric
population.
Sensor
calibration
information Enter the Lot code and the Calibration code and Confirm. For more
information see page 32. If the Spiro Perfect VCT 400 is selected this area
is not applicable.
5.6 Customize the spiro.txt file
Statements used in the Comment editor can be customized. Please refer to the Workstation
manual for general instructions on editing this file.
Medication list
In addition to the pre-defined comment and interpretation statements, this file also contains
the medications shown in the medication list. These items are immediately followed by an
asterisk (*) in the spiro.txt file.
Note: If no spiro_cmt.txt file is available the spiro.txt file is used.