Welch Allyn CardioPerfect Workstation SpiroPerfect Module - User Manual - Manual (Page 25)

CardioPerfect Workstation
SpiroPerfect Module
– User Manual
DIR 80012334 Ver. F 25 / 95
Figure 5.4 Spirometry Parameters tab
Select parameters for three categories:
Setting
Description
Measurements Parameters selected in the Measurements column are displayed in the
Measurements Tab of the SpiroPerfect module.
Six parameters Parameters selected in the Six parameters column are displayed in the six
parameters table of the module’s Parameter area. A maximum of six
parameters can be selected per test type. For FVC, a minimum of three
parameters is required.
Printer Parameters selected in the Printer column are printed on the reports.
WARNING
Selecting more than 15 parameters for
printing may result in the list of printed
parameters being truncated on all but the
Best FVC report.
Parameters Measured
FVC testing
FVC
FEV2
FEV1%
PEF
FEF75-85 FIVC
FEV3
FEV1/FVC
FEF25
PIF FIV1
FEV5
FEV2%
FEF50
FIF50 FIV1%
FEV6
FEV3%
FEF75
FEF50/FIF50 FEV0.5
FIV0.5
FEV5%
FEF0.2-1.2
FEV1/FEV6 FEV1
FEV0.5%
FEV6%
FEF25-75
FET