beautypg.com

Alarm limit setting – Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual User Manual

Page 41

background image

Directions for use

Alarms

37

Alarm limit setting

1.

Press the Setup button

.

2. Select the menu item Alarms.

3. Use the trim knob to scroll through the alarm settings and select the limits.

Note

All alarm limits are reset to the default settings after confirming a new patient
(see

“Standby mode”

on page 24

),

or switching off the monitor.

Note

Individual parameter alarm limits can be set in the parameter menu (see

“Monitoring and Measurements” on page 39

).

Note

The Alarm settings for arrhythmia are detailed in the Arrhythmia menu option in
the setup menu.

Note

When the monitor is connected to an Acuity Central Station, alarm limits can be
changed at the monitor or at the Acuity Central Station. When confirmed, the
alarm limits are synchronized for both the monitor and Acuity.

See also other documents in the category Welch Allyn Equipment: