beautypg.com

Saving the user-defined settings as default, Restoring the user settings – Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual User Manual

Page 25

background image

Directions for use

Operation

21

Saving the user-defined settings as default

All monitor settings, including alarms settings, are stored until the monitor is switched off.
To save the user defined settings as default,

1.

Press the Setup button

.

2. Select Administrator > System > Save User Defaults.

3. Confirm with ok:

Restoring the user settings

1.

Press the Setup button

.

2. Select Restore User Defaults. You are prompted to confirm:

Note

The system menu is password protected. The password is 49, 48, 46.

See also other documents in the category Welch Allyn Equipment: