Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual - Manual (Page 29)

Directions for use Operation 25
Defining parameter fields
1. Press the Setup button .
2. Select Parameters.
The screen will vary according to the licensed options:
• etCO
2
, ST and CO are only displayed when the options are licensed.
• The Masimo settings enabled (yes / no), gives extra settings for SpO2
measurement (see
“SpO2 monitoring” on page 68) and is only displayed when the
Masimo module is installed.
• The Temperature options are only available when two temperature connectors are
installed on the patient panel.
• The IBP options are only available when four IBP connectors are installed on the
patient panel.