Welch Allyn 1500 Patient Monitor v.1.4.X - User Manual - Manual (Page 125)

Directions for use Settings 121
Parameter settings
1. Move to the desired parameter measurement field using the trim knob. A white
frame appears around the selected measurement field.
2. The selected menu is displayed by pressing the trim knob.
The settings available and default settings are given in the Monitoring section (see
“Monitoring and Measurements” on page 39 ).
• ECG / Heart rate / Pacemaker (see “ECG” on page 40).
• ST (see “ST measurement (option)” on page 52).
• RR / Respiration (see “Respiration rate” on page 55).
• etCO
2
/ Respiration (see “Capnography” on page 57)
• NIBP (see “NIBP monitoring” on page 64).
• SpO
2
(see “SpO2 monitoring” on page 68).
• IBP (see “IBP monitoring” on page 73).
• Temperature (see “Temperature monitoring” on page 77).
• Cardiac output ((see “Cardiac output (option)” on page 78).