Canon FAX-L800 - Manual (Page 359)

Canon FAX-L800 User’s Guide ENGLISH
G-13 Glossary
TTI
Stands for transmit terminal identification. Also called sender information. The
TTI is the name of the person or organisation and the facsimile number of the
fax that sends a document. In addition to a unit name that you register for the
fax, you can create up to 99 sender names that can be selected and used in place
of the unit name when you send a facsimile transmission.
TTI SELECTOR
With this feature you can select the name to be printed at the top of the message
you send. Usually you register your company name as the TTI, but you can also
use personal names.
TX password
The ITU-T password set on your fax that accompanies the document you send
and must match the RX password on the fax where it is received. If your TX
password matches the RX password of the other party’s fax, the document is
received. If the passwords do not match, the document is not received. The
maximum length of the password is 20 digits and may consist of numbers, spaces,
asterisk (*), and pound mark (#).
U
UHQ
Stands for ultra high quality image. Allows you to send documents that are very
close to the quality of the original.
Urgent document
Use direct sending to send an urgent document ahead of documents in the
memory waiting to be sent. Just feed the urgent document into the facsimile and
dial, and press DIRECT TX. As soon as the facsimile finishes sending the current
document from the memory, it will send the urgent document. See also direct
sending.