Canon FAX-L800 - Manual (Page 181)

Canon FAX-L800 User’s Guide ENGLISH
9-7 Chapter 9 Using a Relay Network
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
M NO
WXYZ
DEF SET 4. Use the buttons on the numeric keypad to enter the group number. Then
press SET.
CHANGE DATA
PASSWORD
If you have not set the operation password, you can skip the next step.
1
4
7
2
5
8
0
3
6
9
ABC
GHI
PQRS
JKL
TUV
M NO
WXYZ
DEF SET 5. Enter the four-digit operation password and press SET.
CHANGE DATA
1.GROUP DIAL NAME
<
<
SET
6. Press the search buttons to display the item you want to change and press
SET.
½ To change the settings for an item, follow the same procedures you used
for initial setup of the relay group. (
Q9-3)
½ To delete an item, press CLEAR and then press SET.
½ To turn off the relay feature for the group and retain the setup, press the
search buttons to display 10.RELAY B’CAST, press SET, and turn this
feature off. You do not have to delete the relay group to disable it
temporarily.
½ To change the operation password, first you have to enter the old
password (it is not displayed as you enter it) and then you have to enter
the new password (it is displayed as you enter it).
7. When you are finished making changes, press STOP to return to standby.
Deleting the Relay Group
Follow this procedure to delete the relay group and all of its settings.
1. Open the RELAY TX GROUP menu. ( Q9-3)
RELAY TX GROUP
1.SETUP FILE
<
< 2. Press the search buttons until you see the display below.
RELAY TX GROUP
3.DELETE FILE