Canon FAX-L800 - Manual (Page 203)

Canon FAX-L800 User’s Guide ENGLISH
11-5 Chapter 11 Setting Up and Using Polling
7. Press START/SCAN to start polling the other faxes.
½ If the other document is holding the document under a subaddress, your
subaddress must match the other party’s subaddress.
½ If the other document is holding the document under both a subaddress
and password, then you must poll the fax with both a matching
subaddress and password.
Polling to Receive at a Preset Time
Follow this procedure to set the fax to poll another fax at a preset time. Polling
faxes at preset times allows you to conduct document transactions later at night
when the telephone rates are lower.
Before you set up polling at a preset time, make sure you have performed the
following tasks:
½ The numbers you want to register for dialling must be registered for One-
touch or Coded Speed Dialling buttons. ( Q4-6, 4-14)
½ When you register the One-touch or Coded Speed dialling button, you must
turn on OPTIONAL SETTINGS and set the TX TYPE for POLLING RX
when the other party set subaddress/password, you have to register an ITU-T
subaddress and/or password for the speed dialling button. (
Q4-8, 4-16)
½ If you have to poll a number that you use regularly, you should register it
once again for another speed dialling button so you can set the ITU-T
subaddress and/or password to match the polling box of the other party’s fax
and register the second number for preset polling.
1. Open the PRESET POLLING menu.
DATA REGISTRATION
Open both One-touch Speed Dialling panels. Then press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
SET Press SET.
DATA REGISTRATION
1.USER SETTINGS
<
< Press the search buttons until you see the display below.
DATA REGISTRATION
6.FILE SETTINGS