Canon FAX-L800 - Manual (Page 246)

Canon FAX-L800 User’s Guide ENGLISH
13-14 Chapter 13 Restricting Use of the Fax
5. Press STOP to return to standby.
To turn the settings on again, just repeat this procedure from step 1 and select
ON.
Receiving Documents from Registered
Senders Only
Follow this procedure to turn restricted receiving on and off. Restricted receiving
limits document reception to fax units whose telephone numbers are registered
on your fax for One-touch or Coded Speed Dialling buttons. You can not receive
a document from another fax unless it is registered on your fax for a speed
dialling button, so the fax will not receive unsolicited direct mail.
1. Open the SYSTEM SETTINGS menu with your system settings password.
( Q13-3)
<
< 2. Press the search buttons until you see the display below.
SYSTEM SETTINGS
4.RX RESTRICTION
SET 3. Press SET.
<
<
SET
4. Press the search buttons to display the setting you want, then press SET.
RX RESTRICTION
OFF
RX RESTRICTION
ON
OFF Your fax will receive a document even if the fax telephone
number of the originator is not registered on your fax for a One-
touch Speed Dialling button or a Coded Speed Dialling code.
However, other restrictions like passwords, subaddresses, and so
on, still apply.
ON Your fax will receive a document only if the fax telephone
number of the originator is registered on your fax for a One-
touch Speed Dialling button or a Coded Speed Dialling code.
5. Press STOP to return to standby.