Canon FAX-L800 - Manual (Page 177)

Canon FAX-L800 User’s Guide ENGLISH
9-3 Chapter 9 Using a Relay Network
½ Ask the originator if they would like to receive a report of successful
transmission after your fax relays the document.
½ Make sure the relay feature on your fax is turned on.
Follow the procedures in this section to set up your fax as a relay unit. When
your fax is the relay unit, it receives the document from the originator and relays
it to several other destinations.
Setting Your Fax as a Relay Unit
Follow this procedure to set your fax to participate in a relay network as a relay
unit.
1. Open the RELAY TX GROUP menu.
DATA REGISTRATION
Open both One-touch Speed Dialling panels and press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
SET Press SET.
DATA REGISTRATION
1.USER SETTINGS
<
< Press the search buttons until you see the display below.
DATA REGISTRATION
6.FILE SETTINGS
SET Press SET.
FILE SETTINGS
1.CONFID. MAILBOX
<
< Press the search buttons until you see the display below.
FILE SETTINGS
2.RELAY TX GROUP
SET Press SET.
RELAY TX GROUP
1.SETUP FILE