Turning on and adjusting the auto switch time – Canon FAX-L800 User Manual
Page 134
Canon
FAX-L800 User’s Guide
ENGLISH
7-4
Chapter 7
Receiving Documents
Receive error messages
Here are few of the most common error messages.
The fax has run out of paper while printing or copying a document:
SUPPLY REC. PAPER
Open the paper cassette and add paper to the paper cassette. As soon as you re-
fill the paper cassette and close it, the remainder of the document in the memory
is printed. (
Q2-22)
The toner cartridge has run out of toner while printing or copying a document:
REPLACE CARTRIDGE
Open the printer cover and replace the toner cartridge. As soon as you close the
cover, the fax returns to standby and the remainder of the document in the
memory starts printing automatically. (
Q15-14)
If you see any other error messages, note the message then look it up in the error
message table. (
Q15-26)
Turning on and Adjusting the Auto Switch Time
If you have installed the optional handset or connected an extension telephone to
the fax machine, follow this procedure to set the ring time before the fax switches
automatically to the document receive mode while in the manual receive mode.
This allows more time for you to pick up the handset and answer the telephone
for voice communication before the fax switches to the receive mode.
DATA REGISTRATION
1. Open the RX SETTINGS menu.
Open both One-touch Speed Dialling panels. Then press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
SET
Press SET.
DATA REGISTRATION
1.USER SETTINGS