35b7.4 maintenance, 67bfor heavy dirt, 68bhow to take care of the balance – Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual User Manual

Page 89: 35b 7.4, Maintenance, 67b for heavy dirt, 68b how to take care of the balance, 4 maintenance, For heavy dirt, How to take care of the balance

RL-TS Series Operation Manual 85

35B

7.4 Maintenance

When taking care of the balance, be careful of the following:

67B

For heavy dirt

If the balance is very dirty, disassemble and clean it.

The parts that you can remove are only the pan and the pan base.

Removing parts other than the pan and the pan base damages the waterproof function

of the balance, resulting in possible failure.

68B

How to take care of the balance

To clean the main unit, use a piece of dry soft cloth.
If the unit is very dirty, use a cloth soaked in a small quantity of neutral detergent or cleaning solvent. If the

unit is extremely dirty, wash it with water and dry it well with a dry cloth.

When washing the main unit with water, do not submerge it in water.
Check that the power cap, the RS232 connector cap, and the battery case are tightly

attached.
Do not scratch the diaphragm and the bottom ventilation hole using a sharp object,

hard brush, or other such hazardous tools.

Diaphragm

Bottom ventilation holes

Pan base