Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 16)

12 RL-TS Series Operation Manual
6B
1.4 How to See Displayed Signs
Each of the signs displayed on the front of the main unit has the following meanings:
Displayed sign Description
Stable state indicator (Indicates that readout is stable.)
Lights up when the limit function is used.
Indicates that the addition function is enabled when the balance is in
addition mode.
Minus.
Indicates that settings are being saved. Blinks when adjusting the
zero-point and when waiting for tare range setting to stabilize.
Zero-point.
Bar graph. Shows gross weight using the rate to the weighing capacity.
Displayed in 2-point bar graph.
Displayed when the balance is powered by batteries. Remaining battery
time is indicated in three levels. When this indicator blinks, the batteries
are dead.
Indicates that gross weight is being displayed.
Indicates that data is being output.
Indicates that the balance is in animal weighing mode.
Lights up when a tare range is set.