Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 61)

RL-TS Series Operation Manual 57
25B
5.3 Saving Container (Tare) Weight
Use this function to set a tare range when the balance is powered on using the latest saved tare weight. Use
this function when you turn the balance on or off with a sample and tare put on the pan.
Leaving the balance loaded with a substance and tare for a long period may result in a larger
error in weighing. You should set the tare range regularly.
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting
Basics (P.
X
22
X
).)
Press and hold the [Function] key. After
“Func” is displayed, release the finger.
2
Set the tare saving. Press the [Function] key several times to select
“J.tA.N.”
Select “1” by pressing the [Zero/Tare] key.
3
Save the setting. Press the [Target] key.
The balance goes back to normal display.
4
Save the tare weight. Place the container (tare) to be saved for weight
and then measure the tare.
The saved tare weight is updated every time a
tare range is set.