Rice Lake TS Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 63)

RL-TS Series Operation Manual 59
57B
Auto Backlight Off
This function automatically turns off the backlight if the balance is left untouched in measurement mode for about
three minutes.
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting
Basics (P.
X
22
X
).)
Press and hold the [Function] key. After “Func” is
displayed, release the finger.
2 Set the auto backlight off.
Press the [Function] key several times to select “A.A.b.”
Select “1” by pressing the [Zero/Tare] key.
3
Save the setting. Press the [Target] key.
The balance goes back to normal display.
The auto backlight off function does not work under the following conditions:
- Function settings are set.
- An object is placed on the pan, and display is not stable.
Placing an object on the pan or pressing any key turns the backlight on again automatically.
27B
Reference