Rice Lake Signal Conditioning Transmitter/Indicators - Manual (Page 54)

50 SCT Weight Transmitter Operator’s Manual
The output status can be read at any time but can be set (written) only if the output has been set as NOdbUS or
dEUnEt (see Section 2.10 on page 27); otherwise, the outputs will be managed according to the current weight
status with respect to the relevant setpoints.
Status Register (40007)
Bit 0 Cell Error
Bit 1 AD Convertor Malfunction
Bit 2 Maximum weight exceeded by 9 divisions
Bit 3 Gross weight higher than 110% of full scale
Bit 4 Gross weight beyond 999999 or less than -999999
Bit 5 Net weight beyond 999999 or less than -999999
Bit 6
Bit 7 Gross weight negative sign
Bit 8 Net weight negative sign
Bit 9 Peak weight negative sign
Bit 10 Net display mode
Bit 11 Weight stability
Bit 12 Weight within +/-¼ of a division around ZERO
Bit 13
Bit 14
Bit 15
INPUTS REGISTER (40029)
(Read Only)
OUTPUTS REGISTER (40030)
(Read and Write)
Bit 0 INPUT 1 Status Bit 0 OUTPUT 1 Status
Bit 1 INPUT 2 Status Bit 1 OUTPUT 2 Status
Bit 2 Bit 2 OUTPUT 3 Status
Bit 3 Bit 3
Bit 4 Bit 4
Bit 5 Bit 5
Bit 6 Bit 6
Bit 7 Bit 7
Bit 8 Bit 8
Bit 9 Bit 9
Bit 10 Bit 10
Bit 11 Bit 11
Bit 12 Bit 12
Bit 13 Bit 13
Bit 14 Bit 14
Bit 15 Bit 15
Note