beautypg.com

9 sct20-tcp/ip (ethernet tcp/ip), Ethernet tcp/ip – Rice Lake Signal Conditioning Transmitter/Indicators User Manual

Page 48

background image

44 SCT Weight Transmitter Operator’s Manual

3.9 SCT20-TCP/IP (Ethernet TCP/IP)

To configure Ethernet TCP/IP port of SCT20-TCP/IP, the Lantronix DeviceInstaller must be installed on a

Windows PC (launch DevInst.exe on the CD to install it).

1. Connect the PC and SCT20-TCP/IP through a LAN (point-to-point or with hub/switch), and then launch

the Lantronix DeviceInstaller.

2. Select the

Search

button and the application will find the SCT20-TCP/IP in the LAN.

Figure 3-1. Find SCT20-TCP/IP in LAN

3. Select the device and then select the

Telnet Configuration

.

4. Select the

Connect

button and then press Enter.

5. Press

0 [Server]

and change only IP Address four fields (don’t change other parameters: press

Enter

to

confirm). It is strongly recommended to set a fixed IP Address.

6. Press

1 [Channel 1]

if you want to change serial BaudRate of the Ethernet Module to match the BaudRate

set in SCT20-TCP/IP Protocol Selection (default 9600) (don’t change other parameters: press

Enter

to

confirm.

EtherNet TCP/IP

This manual is related to the following products:
See also other documents in the category Rice Lake Scales: