Losi LOSB9556 1/8 Xcelorin ESC Manual - Manual (Page 9)

LOSB9516 Xcelorin Electronic Speed Control v1.0 Page 9
4. Release setup button.
5. The status LEDs flash to indicate the current profile setting.
LED status for each Profile below:
Profile 1 Yellow and Blue LEDs flash
Profile 2 Yellow, Blue and Green LEDs flash (default setting)
Profile 3 Yellow, Blue, Green and Red LEDs Flash
Profile 4 Red and Blue LEDs flash
Profile 5 Yellow and Green LEDs flashing quickly
6. To make a change, quickly press the setup button, which will advance you to
the next profile.
9
7. When you are finished, press and hold the setup button for 2 seconds, the
four status LEDs will scroll and the new selection will be stored to the active
memory of the ESC.