Losi LOSA1755 - Manual

Decrease Toe-In
Inside Position
Outside Position
Increase Toe-In
Up Position
Increase Anti-Squat
Down Position
Decrease Anti-Squat
Rear Inner Brace
A1755
Adjustment Cam
A1756
Rear Outer Brace
A1755
Hinge Pin
A6500
A4450
Rear Bulkhead
Remove the Bulkhead from the chassis.
Remove the existing Hinge Pin Braces and plastic covers.
Select the desired Adjustment Cam and press it into the new Adjustable Hinge Pin Braces.
*Note the position of the number on the outside of the Cam. Always install the same number Cam in the same orientation on each side
of the car.
Install the Inner Adjustable Hinge Pin Brace re-using the mounting hardware.
Align the Arms and Hinge Pins with the Adjustment Cam.
Install the Outer Adjustable Hinge Pin Brace re-using the existing hardware.
Re-attach the bulkhead to the chassis.
Check the suspension to ensure it moves freely and does not bind.
•
•
•
•
•
•
•
•
•
Rear Toe-In Adjustment
Insert
Position
Insert
Number
Total
Toe-In
Inside 1° 2°
Inside 0.5° 2.5°
Middle 0 3°
Outside 0.5° 3.5°
Outside 1° 4°
Rear Anti-Squat Adjustment
Insert
Position
Insert
Number
Total
Anti-Squat
Up 1° 3°
Up 0.5° 2.5°
Middle 0 2°
Down 0.5° 1.5°
Down 1° 1°
LOSA 1755
Adjustable Hinge Pin Brace Install STEP A-01
800-0330