Losi LOSB9556 1/8 Xcelorin ESC Manual User Manual
Page 37
LOSB9516 Xcelorin Electronic Speed Control v1.0 Page 37
Braking Percent - Gives you the ability to have full control over the amount of
brake your vehicle will have.
NOTE: Selecting the advanced function “BRAKE CURVE” and using this method to adjust
the feel of the desired brake strength will override the “Braking Percent” parameter.
•
10% Effect will be 10% of full brakes
•
20% Effect will be 20% of full brakes.
•
30% Effect will be 30% of full brakes
•
40% Effect will be 40% of full brakes.
•
50% Effect will be 50% of full brakes
Percent Drag Brake – The drag brake function provides the driver a set
percentage of brake when you have the transmitter resting in neutral. This will
create the “feel” of a brushed motor.
Drag brake is used in racing to slow a vehicle as you let off approaching a
corner versus the driver having to push the brake at every corner.
Try working with this to get a sense of how you might use this for your track.
If you are running on a high-traction track with tight corners, a stronger setting
should work best.
If you are running in an open area, you will find a smaller percentage will result
in better control.
If you are running in dusty or slippery surfaces, you will more than likely want
to use the lowest option.