Losi LOSB9556 1/8 Xcelorin ESC Manual User Manual
Page 35
LOSB9516 Xcelorin Electronic Speed Control v1.0 Page 35
Motor Timing - This option affects the power band and efficiency (run time) of
an electric motor. The default is “Normal” and is a good starting point to
deliver power and provide good run time.
•
Very Low Provides power for running through soft surfaces, having fun
and
longer run time.
•
Low (Default) Provides maximum efficiency with less power. Higher timing
produces significantly more power but at the expense of efficiency (less run
time) and typically the motor will generate more heat. Each brushless motor will
respond to timing differently. Good for running around on paved, or harder
surfaces, and racing with high Kv rated or low-turn motors.
•
Normal Good mix of power and efficiency using any motor.
•
High More power than efficiency so run time will reduce, and you should be
monitoring motor heat. The higher Kv or lower turn motors will generate heat
quickly using this setting. A safe high temperature range is 165F to 180F (74° -
82° Celsius), going higher may damage your motor.
•
Very High This is maximum power and must be used with
caution
.
•
Any motor has the potential to over-heat in this setting. Frequently check the
motor temperature and make sure you’re not operating higher than 165° and
180° Fahrenheit (74° - 82° Celsius), which may damage your motor, or damage
your Electronic Speed Control (ESC).