Losi LOSB9545 User Manual
Convert your losi micro vehicle

Conversion of Brushed Micro Vehicle to Brushless
page 1 of 14
Convert your Losi Micro Vehicle
from Brushed to Brushless power
Before we begin the conversion, let’s make sure we have all the components you will
need.
Parts Required:
A – You will need a NEW servo to replace the stock servo. We recommend the JR
®
sport
SM22 servo since it replaces the stock version easily.
B – This is a servo saver for the JR SM22 servo. Part number – LOSB0820
C – The receiver chosen is the Spektrum™ Micro Receiver. Part Number – SR3500
Note: You will need a Spektrum Transmitter or one with a Spektrum Module.
D – The Electronic Speed Control (ESC) 36
th
ESC LOSB9530 and in LOSB9594
E - Shown in the figure below is the brushless motor. There are two different motors
available:
LOSB9544
36
th
Brushless Motor 8750Kv Also packaged with the ESC in LOSB9594
LOSB9545
36
th
Brushless Motor 10200Kv
F – Optional LiPo battery. Part number LOSB0862 w/charger and LOSB0863 w/o charger
Note: Due to the Brushless Systems operation and performance, some NiMH
battery packs may not perform under the potential loads.