Losi LOSB9556 1/8 Xcelorin ESC Manual User Manual
Page 8
LOSB9516 Xcelorin Electronic Speed Control v1.0 Page 8
For example if you have the ESC active profile set to Profile #2 (Default) and
would like a little more brake but would like nothing else changed, place the
jumpers on the following choices.
Brake - 30% (default is 20%)
Drag Brake – 4%
Brake/Reverse Role- Forward only
Radio System - 2.4GHz
Then follow the instructions for using the Quick Programming Card. You can
change one setting at a time or any combination. Making the above change is
ONLY overriding the active profile. At any time, you can reset the ESC to
profile #3 and the active profile is returned to the original profile #3 settings.
Selecting Profiles
Notice that Profile #2 is set from the factory as the DEFAULT.
1. Turn the Transmitter on.
2. Turn the vehicle on.
3. With the ESC turned on and ready for operation, press and hold the setup
button until both the Yellow and Blue LEDs flash.