Losi LOSB9556 1/8 Xcelorin ESC Manual User Manual
Page 4
LOSB9516 Xcelorin Electronic Speed Control v1.0 Page 4
A key feature is the three (3) stored settings within the ESC that are easily
recalled for convenient use. These stored settings are referred to as “profiles.”
There are also two (2) user profiles that are written to by using the supplied
software. These do not limit the functions of the ESC as you can easily use the
included 8th Quick Programming Card (8QPC) to make changes to any desired
setting.
The Low Voltage Cutoff (LVC) is preset for 4S LiPo batteries. For more
experienced users, it can be changed to support NiMH, 3S, 4S and 5S LiPo
batteries. Using the Quick Programming Card (8QPC), adjustments to the ESC
can be made quickly and simply.
The Xcelorin ESC has a feature within it to prevent the vehicle from going into
reverse before you have come to a complete stop. Once you have come to a
stop, release the throttle trigger to the neutral position. Once you have been at
neutral, push the trigger forward to engage reverse (if active). The ESC is also
programmed to prevent going directly from reverse drive to forward. The ESC
will have a short pause when changing from reverse to going forward to
prevent damage to the motor or drivetrain of your vehicle.